December 12, 2024

Installation and repair of water filters

If the installation is poor or if the repair is done “on the fly,” problems may arise, and you will have to reinstall the equipment. In some cases, you can completely ruin the expensive equipment.

What kind of breakdowns can there be:

•             Spillage due to a breach in the tightness of the connections of the device and pipelines;

•             Filter failure due to mechanical damage;

•             Due to clogging, some parts of the filter may fail;

•             Due to the long-term operation of the elements or incorrect installation, the water tap may also break.

To install a water filter correctly and efficiently, you must either Water dispenser repair Hyderabad or solve everything yourself, following the instructions. They are usually included with the device.

Experts advise installing the filter next to the household faucet mixer in the kitchen. You need to drill a hole, taking into account the required size. Before work, you must shut off the water supply and drain the remaining water. After that, disconnect the cold water network and connect the branch pipe to the filter. The water pipes are connected to the filter installed under the sink, and the faucet is secured. Threaded structures are connected using FUM tape.

Some nuances:

•             Do not kink the hoses;

•             Change cartridges strictly according to the instructions;

•             When replacing cartridges, rinse the flasks.

Repair is necessary if the bulb breaks or the threaded structure is damaged. Then you need to order and attach a new bulb instead of the old one. Also, if the tap is out of order, you should replace it.

Replacing cartridges requires a serious approach. First, close the lower ball valve and open clean water. Then disconnect the hoses from the filter, unscrew the flask, and insert a new cartridge instead of the old one. If possible, use the tools from the kit and lubricate the elastic gaskets with latex grease. This will ensure safe cartridge replacement and prevent damage to the rubber gasket in the flask.

If the tees or fittings are damaged, you need to order new ones. Replacing them is easy since all you need is adjustable and plastic wrenches. To avoid technical problems in the future, you should contact RO service near me.

Qualified specialists of the in-house service department of the company Repair Service Bro will help you make a high-quality selection, design, calculation, installation, and service warranty and post-warranty service of the entire range of equipment offered. You can order the service both in the service department and in the network of stores of the Repair Service Bro company in India and on our online trading platform. All that is required of you is to choose the appropriate option, contact the online consultant, and place an order on our website.

Our online store specializes in selling such products and has been selling them for a long time; the company Repair Service Bro is already many years old.

Signs of a faulty filter

The filter needs to be repaired in the following cases:

•             If the automatic control valve display shows a corresponding notification with an error code, which can be used to diagnose the cause of the malfunction quickly.

•             In case the consumer has detected a change in the organoleptic properties of water. It may emit a specific smell, lose transparency, become an unusual shade, or acquire a unique taste. This is because the filter does not remove some contaminants due to clogged loading or other similar reasons.

•             If the presence of impurities in water is detected in other ways. For example, if a visible mineral deposit remains on the walls and heating element of the kettle after boiling, the softener module with ion-exchange resin will not work correctly.

•             In case of a significant decrease in filter performance. Reduction of the filter capacity results in less water entering the water supply. This affects the water pressure from the tap and can lead to errors in the operation of household appliances – washing machines, boilers, etc.